|
1. Hold Crash Bar Against Leg Shield And Mark A Hole On The Bottom Part
Of The Belly Pan.This Is Better Done By 2-People And A Tape Measure |
|
|
|
2. Pull Back Front Of Outer Runner Strip And Drill 5mm Hole |
|
|
|
3. Place The Screw Supplied In The Hole |
|
|
|
4. Fit The Bottom Brakets And Do Them Up Hand Tight |
|
|
|
5. Fit The Top Arms And Hook As Shown.Hand Tight |
|
|
|
6. Start Doing Up The Bottom First Then Top Then Back To Bottom Until Bar Is Firm.
As All 4 Fixings Are Tightened The Bar Will Need Holding In Place. |
|
|
|
|
